AzbroWax - TIPS ON USE |
- DO NOT use an armature in your castings. This formula has a 4% shrinkage.
Therefore the cast will crack around the armature as the wax cools and
shrinks.
|
- Before pouring the wax measure the temperature carefully with a thermometer.
If it is too hot the AzbroWax may bond to the mold surface.
|
- To adhere AzbroWax to itself, melt both pieces and stick together.
If only one side is heated once the wax cools it will pop right off.
This can be used to an advantage if you want to make a multi-part mold
- parts that are not “welded” will come apart cleanly.
|
|